TB-9-2510-251-13

TECHNICAL BULLETIN

OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING

AUGUST 2007
TB-9-2510-251-13

  TB-9-2510-251-13 - Page 195 of 624

2-179
TB 9-2510-251-13
2-2.2
Installation of Air Conditioning Kit to M998 and M998A1 Four-Door with O'Gara Hess
Add-on-Armor (Cont’d).
b. Install Evaporator and Condenser (Cont’d)
20
19
HIDDEN
21
HIDDEN
Figure 2-262.
Evaporator Unit
(11)
Position evaporator unit in vehicle and align holes in evaporator brackets over drilled holes
in transmission tunnel.
Align hole in passenger side vertical evaporator bracket with hole
where D-ring was removed.
Align drain tubes with duck bills with 1 1/4 inch (1.25) diameter
holes.
(12)
Secure unit through floor with three screws (19), six washers (20), and three locknuts (21).
Secure passenger side vertical evaporator bracket with previously removed bolt and D-ring.


Back to Top