TB-9-2510-251-13

TECHNICAL BULLETIN

OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING

AUGUST 2007

TB-9-2510-251-13 - Page 198 of 624

2-182

TB 9-2510-251-13

1

1

2

(16) If present, remove plywood panel from between seats on top of transmission tunnel.

(17)

Remove top screws from driver’s side mats and transmission tunnel.

(18)

Position drill template, found in Installation Kit, on transmission tunnel and tape into

position.

Drill two 11/16 inch (.6875 inch) holes (1) and one 11/4 inch (1.25 inch) hole (2)

as shown on side of transmission tunnel.

(19)

De-burr panel.

2-2.2

Installation of Air Conditioning Kit to M998 and M998A1 Four-Door with O'Gara Hess

Add-on-Armor (Cont’d).

b. Install Evaporator and Condenser (Cont’d)

Figure 2-266.

Transmission Tunnel Holes

Figure 2-267.

Auxiliary Power Panel

3

(20)

Remove front passenger seat to expose battery box.

(21)

Remove either auxiliary power panel (3) or batteries to gain access to drill hole in battery

box.