TB-9-2510-251-24

TECHNICAL BULLETIN

INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)

JULY 2005

TB-9-2510-251-24 - Page 169 of 212

TB 9-2510-251-24

NOTE

Some models do not

have

existing

holes.

Drill with 9/32” drill bit

and ½” drill bit where

needed.

3.

Place rear door bottom

plate onto vehicle aligning

with holes.

4.

Insert six ¼” – 20 and 1 ¼”

bolts and ¼” washers

(1” outside diameter) through

plate and body of vehicle with

¼” – 20 locking nuts and

tighten mounting hardware.

4-17