TB-9-2510-251-24

TECHNICAL BULLETIN

INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)

JULY 2005

TB-9-2510-251-24 - Page 176 of 212

TB 9-2510-251-24

4-11 ARMOR KIT INSTALLATION INSTRUCTIONS

1.

Remove rear seat back rest

panel exposing rear seat

compartment.

Cut aluminum floor

plating at outer side of vehicle.

Cut back rest panel in order for it

to be replaced.

NOTE

Put angle iron in place as

close to the outside of

vehicle as possible.

Angle

iron must face driver’s

compartment.

2.

Attach 3” x 3” angle to bottom

of armor back rest plating with

3/8” x 16 x 1 ½” bolt, 3/8” washer,

and 3/8” locking nut.

4-24