TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 10 of 704
h
TB 9-3950-253-13&P
During this procedure, the twistlock assembly will be allowed to swing free unless it is
manually supported. Ensure no personnel are standing in the path of the twistlock
assembly. Failure to follow this warning may result in injury to personnel.
WARNING
UNLOADING/LOADING LIFT FRAME
•
Use extreme caution while loading/unloading lift frame. Check for overhead wires or
cables and verify adequate clearance to complete operation.
•
Use a ground guide at all times when unloading/loading lift frame.
•
Use extreme caution if high wind conditions exist while unloading lift frame. With
assistance, attach guide straps to the legs of the lift frame to stabilize the lift frame during
the unloading procedure.
•
DO NOT stand behind lift frame while loading/unloading.
•
Failure to follow these warnings may result in injury or death to personnel and damage to
equipment.
WARNING
UPPER GUIDES ON CORNER CASTINGS
Do not attempt to complete this procedure if upper guides do not become fully located on
corner castings. Failure to follow this warning may result in injury or death to personnel
and damage to equipment.
•
DO NOT move vehicle until container is secured.
•
During these adjustments, personnel must work outside the vehicle where there are
several projecting parts, and personnel are required to bend down. Take care when
bending and straightening. A hard hat is required.
•
Failure to follow these warnings may result in injury to personnel.
WARNING
TWISTLOCK CONFIGURATION
WARNING
WORK SAFETY
Back to Top
