TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 6 of 704
d
TB 9-3950-253-13&P
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa)
nozzle pressure when drying parts with compressed air. Use a maximum of 30 psi (207
kPa) when cleaning components. DO NOT direct compressed air against human skin.
Make sure air stream is directed away from user and other personnel in the area. To
prevent injury, user must wear protective goggles or face shield. Failure to follow this
warning may result in injury or death to personnel.
WARNING
CONTAINER NOT SECURE
Be aware container may be unsecure on vehicle. Do not drive vehicle with container in this
condition. Failure to follow this warning may result in injury or death to personnel and
damage to equipment.
•
Appropriate safety precautions (including, but not limited to, wearing proper breathing
apparatus, hearing protection, safety goggles, etc.) must be observed when working with
CARC material.
•
All cutting and grinding must be done using an abrasive device only. Use of a cutting torch,
plasma cutter, etc., is not permitted.
•
Always wear gloves and a face shield or breathing apparatus when grinding painted
surfaces. Airborne particles may cause lung irritation or damage to eyes.
•
Failure to follow these warnings may cause injury or death to personnel.
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may result in injury or death to personnel.
WARNING
COMPRESSED AIR
WARNING
CUTTING AND GRINDING
WARNING
HEAVY PARTS
Back to Top
