TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 9 of 704
g
TB 9-3950-253-13&P
Hydraulic fluid under pressure can penetrate the skin and cause injury, blindness, or
death. Pressure may build up in a hydraulic system. DO NOT perform any hydraulic
system service without first shutting down the engine to relieve system pressure. Wear
eye protection, gloves, and protective clothing while removing hydraulic hoses. Failure to
follow this warning may result in death or serious injury to personnel.
•
During these adjustments, you are required to work at the rear of the vehicle where there
are several protruding parts. Use extreme caution and wear a hard hat.
•
Front slider bed is heavy. Use extreme caution while changing the configuration of front
slider beds.
•
After releasing locking pins, move hands out of the way.
•
Failure to follow these warnings may result in injury to personnel.
Use caution when removing roller pin. Roller components may fall when roller pin is
removed. Support roller components during removal of roller pin. Failure to follow this
warning may result in injury to personnel or damage to equipment.
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and
low-toxic material. However, it may be irritating to the eyes and skin. Use protective gloves
and goggles. Use in well-ventilated areas. Keep away from open flames and other
sources of ignition. Failure to follow this warning may result in injury or death to personnel.
WARNING
RELIEVING HYDRAULIC SYSTEM PRESSURE
WARNING
SLIDER CONFIGURATION
WARNING
ROLLER PIN
WARNING
SOLVENT CLEANING COMPOUND
Back to Top
