TM-1-1500-344-23-2

AIRCRAFT VOLUME II

TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL

APRIL 2009

TM-1-1500-344-23-2 - Page 104 of 240

5-6

NAVAIR 01-1A-509-2

TM 1-1500-344-23-2

15 April 2009

5-9.1. To avoid contamination of the treated surface,

apply primer according to procedures in Appendix A

(Navy) or TM 55-1500-345-23 (Army) within 72 hours

after conversion coating or perform temporary

preservation procedures (see paragraph 5-10) as soon

as possible.

5-9.2. If the surface becomes dirty or accumulates oil,

grease, fingerprints, or other contaminants, wipe prior

to painting with clean cheesecloth (CCC-C-440) and an

approved solvent.

5-9.3. If the surface is scratched or the conversion

coating is damaged, clean (refer to paragraph 5-2) and

retreat the surface before applying paint coatings or

sealants.

5-10. TEMPORARY PRESERVATION

. Under adverse

conditions or when the restriction of operations will not

permit the application of a chemical conversion coating,

apply a temporary corrosion preventive compound (CPC)

in accordance with Chapter 8.