TM-1-1500-344-23-4
CONSUMABLE MATERIALS AND EQUIPMENT FOR AIRCRAFT AND AVIONICS VOLUME IV
TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL
SEPTEMBER 2013
TM-1-1500-344-23-4 - Page 45 of 92
2-37
NAVAIR 01-1A-509-4
TM 1-1500-344-23-4
01 September 2013
Nomenclature
Specifcation/
Part No.
National Stock
Number
Unit of
Issue
Intended Use
Usable
On
AC
AV
TWO COMPONENT SEALANTS
Sealing and Coating
Compound,
Corrosion
Inhibitive,
Polysulfde
Rubber
MIL-PRF-81733
Class 1 Grade A
Type I
I-1/2
I-2
Type II
II-1/2
II-2
II-4
Type III
III-1
Type IV
IV-12
IV-24
IV-48
KT (12 OZ, two part)
KT (24 OZ, two part)
OZ (2.5 OZ, frozen)
OZ (6 OZ, frozen)
KT (12 OZ, two part)
KT (24 OZ, two part)
CA (6 OZ, SEMKIT)
KT (12 OZ, two part)
KT (24 OZ, two part)
OZ (2.5 OZ, frozen)
OZ (6 OZ, frozen)
CA (2.5 OZ, SEMKIT)
CA (6 OZ, SEMKIT)
KT (6 OZ, two part)
KT (12 OZ, two part)
KT (24 OZ, two part)
OZ (2.5 OZ, frozen)
OZ (6 OZ, frozen)
CA (2.5 OZ, SEMKIT)
CA (6 OZ, SEMKIT)
KT (12 OZ, two part)
KT (24 OZ, two part)
KT (12 OZ, two part)
KT (24 OZ, two part)
KT (96 OZ, two part)
KT (12 OZ, two part)
KT (96 OZ, two part)
KT (12 OZ, two part)
KT (12 OZ, two part)
Polysulfde sealant that contains
chromated corrosion inhibitors.
Used for sealing faying surfaces
and wet installation oF Fasteners on
permanent structures. It is also the
preferred sealant for form in-place
(FIP) seals on doors, removable
panels, and sealing gaps and
seams. Do not use inside integral
fuel tanks.
Type I - Brush or Dip Application
Type II - Extrusion Gun or Spatula
Application
Type III - Spray Gun Application
Type IV - Faying Surface, Gun or
Spatula Application
X
X
Table 2-14. Sealants
Back to Top
