TM-1-1500-344-23-4

CONSUMABLE MATERIALS AND EQUIPMENT FOR AIRCRAFT AND AVIONICS VOLUME IV

TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL

SEPTEMBER 2013

  TM-1-1500-344-23-4 - Page 52 of 92

2-44
NAVAIR 01-1A-509-4
TM 1-1500-344-23-4
01 September 2013
Table 2-14. Sealants (Cont.)
Nomenclature
Specifcation/
Part No.
National Stock
Number
Unit of
Issue
Intended Use
Usable
On
AC
AV
PROMOTERS, ADHESIVES, AND PRIMERS (Cont.)
Primer for
Electrically
Conductive Silicone
Sealant
Cho-Bond 1086
PT
Use with Cho-Bond 1075
electrically conductive silicone
sealant.
X
Mold Release Agent
Partall Film #10
GL
Release agent for form-in-place
(FIP) sealing applications.
X
ELECTRICAL / AVIONICS SEALANTS
Sealing Compound
Electrically
Conductive and
Corrosion Resistant,
High Temperature
Cho-Bond 1075
PR-2225 B-1
TU (2.5 OZ)
CA (6 OZ, SEMKIT)
Use Cho-Bond 1075 with
Cho-Bond 1086 primer to bond
EMI gaskets to a metal surface.
Use PR-2225 to bond and seal
metal mating surfaces, and to
fllet seal metal lap and butt
joints. Sealant provides electrical
conductivity and prevents galvanic
corrosion for EMI shielding
applications.
X
X
Self-Leveling Green,
Two Part Sealant
HT3326-5-50
HT3326-5-200
CA (50 CC)
CA (200 CC)
For sealing around antenna
connector base in conjunction with
polyurethane gasket installation.
Cures in 30-40 minutes.
X
X
1:1 ThixoFex Gray
Sealant
TG8498-50
CA (50 CC)
Fast curing sealant that does
not contain corrosion inhibitors.
Use for outer edge sealing of
antennas and static dischargers
with conductive gaskets. Cures in
65-75 minutes. Must be painted
±ollowing cure ±or UV protection.
Use with sealant dispenser,
UG981108-01 (see Table 3-6).
X
X
2:1 ThixoFex Gray
Sealant
TG2010-50
CA (50 CC)
Fast curing sealant that does not
contain corrosion inhibitors. Use
for outer edge sealing of antennas
and static dischargers with
conductive gaskets. Cures in 65-75
minutes. Must be painted ±ollowing
cure for UV protection. May also
be used for connector potting. Use
with sealant dispenser, UG981108-
01 (see Table 3-6).
X
X
Stretch Seal
Connector Wrap,
HI-TAK Tape
AD89503-01-24
AD89503-01-36
RO (1" x 24")
RO (1" x 36")
Protection of coaxial connectors
from moisture and corrosion.
X
X
Stretch Seal
Connector Wrap
with Zip Ties
EN110589-01
(small connectors <1")
EN110589-02
(large connectors >1")
KT
KT
Protection of coaxial connectors
from moisture and corrosion. Kit
consists o± one piece wrap and
three zip ties.
X
Stretch Seal
Connector Wrap
with Lacing String
EN110589-03
(small connectors <1")
EN110589-04
(large connectors >1")
EA (1" x 7")
EA (1" x 12")
Protection of coaxial connectors
from moisture and corrosion. Kit
consists o± one piece wrap and
three lacing strings.
X


Back to Top