TM-1-1500-344-23-4
CONSUMABLE MATERIALS AND EQUIPMENT FOR AIRCRAFT AND AVIONICS VOLUME IV
TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL
SEPTEMBER 2013
TM-1-1500-344-23-4 - Page 51 of 92
2-43
NAVAIR 01-1A-509-4
TM 1-1500-344-23-4
01 September 2013
Table 2-14. Sealants (Cont.)
Nomenclature
Specifcation/
Part No.
National Stock
Number
Unit of
Issue
Intended Use
Usable
On
AC
AV
PROMOTERS, ADHESIVES, AND PRIMERS
Adhesion Promoter
for
Polysulfde Sealing
Compounds,
Solvent Based
AMS 3100
PR-148
Blue
PT
Coupling solution for enhancing
the adhesion oF polysulfde
compounds to a wide variety
of substrates (e.g. integral fuel
tanks). Apply by brush or clean
cloth. Material dries at room
temp in approx. 30 minutes. May
cause crazing of acrylics and
polycarbonates: Use PR-142 as an
alternate.
X
Adhesion Promoter
for
Polysulfde Sealing
Compounds,
Water Based
PR-182
Clear
PT
VOC compliant coupling solution
for enhancing the adhesion of
polysulfde compounds to a wide
variety substrates. Apply by brush
or clean cloth. Material dries at
room temp in approx. 30 minutes.
Alternate for AMS 3100.
X
Adhesion
Promoter for
Polysulfde Sealing
Compounds,
Solvent Based
PR-142
PT
Coupling solution for enhancing
the adhesion oF polysulfde
compounds to acrylic and
polycarbonate windshields when
crazing is an issue. Apply by brush
or clean cloth. Material dries at
room temperature in approximately
30 minutes.
X
Adhesion Promoter
for
Polythioether
Sealing
Compounds,
Solvent Based
PR-187
Green
Green
OZ
PT
Coupling solution for enhancing
the adhesion of polythioether
compounds (AMS 3277) to
manganese cured polysulfde
sealants
(AMS-S-8802 Type 2). Apply by
brush or clean cloth. Material
dries at room temp in approx. 30
minutes.
X
Adhesive,
Synthetic Rubber,
Thermoplastic,
General Purpose
MMM-A-189 Class 1
Scotch-Grip 1099
Scotch-Grip 1099-L
QT
TU (2 OZ)
Use to hold ePTFE sealing tape
without adhesive backing in place.
±ast drying and resists weathering,
water, oil, plasticizer migration, and
aliphatic fuels. Scotch Grip
1099 is medium viscocity and is
applied by brush. Scotch Grip
1099-L is low viscocity and may be
applied by spraying.
X
Plastic Adhesive
For ePT±E Sky²ex
Sealing Tape without
adhesive backing
Scotch-Grip 847
TU (5 OZ)
Use to hold ePTFE sealing tape
without adhesive backing in place.
±ast drying and resists weathering,
water, oil, plasticizer migration,
and aliphatic fuels. Alternate for
MMM-A-189.
X
Silicone RTV Primer
Coat
GE SS 4004
DC 1200
COLOR
Red
Clear
Red
Red
PT
PT
QT
GL
Use for improving adhesion of
silicone RTV adhesive-sealants.
Recommended For use with
MIL-A-46146 RTV.
X
X
Back to Top
