TM-1-1500-344-23-4
CONSUMABLE MATERIALS AND EQUIPMENT FOR AIRCRAFT AND AVIONICS VOLUME IV
TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL
SEPTEMBER 2013
TM-1-1500-344-23-4 - Page 65 of 92
3-7
NAVAIR 01-1A-509-4
TM 1-1500-344-23-4
01 September 2013
Nomenclature
Specifcation/
Part No.
National Stock
Number
Unit
of
Issue
Intended Use
Usable On
AC
AV
Grinder, Pneumatic,
Horizontal
(20,000-25,000 RPM)
DG-50-230
EA
Use with 3M Radial Bristle Disc (see Table
2-1) for small corrosion repair and paint
removal.
X
X
Mandrel Assembly,
Radial Bristle Disc
3M No. 990
EA
Use with 3M Radial Bristle Disc (see Table
2-1)
for small corrosion repairs and paint
removal.
X
X
Vacuum Sanding
System, Clayton (unit
includes an ULPA-flter
vacuum, a variety of
pneumatic sanders,
abrasives, tools,
compressed air and
vacuum hoses)
670-DM-1535-0
660-DM-1000
BCE-7000
ACE-1000
EA
EA
EA
EA
Portable vacuum sanding system used to
remove corrosion or coatings. Captures
airborne particles and dust generated by
sanding operations.
For use in shops and hangers, electric.
For use in shops and hangers, pneumatic.
For use in shops and hangers, pneumatic-
cyclone.
For use on-site (ultra-portable, backpack).
X
X
Sanders, Clayton
Vacuum Sanding
Systems
675-12301J (3")
670-12601J (6")
675-10341J (3"x4")
670-10371J (3"x7")
690-003 (Triangle)
EA
EA
EA
EA
EA
Replacement sanders for Clayton Vacuum
Sanding System (refer to Table 2-1 for
abrasives used with Clayton sanders).
X
X
ULPA-Filter Vacuums
DM-100
DM-104
DM-200
DM-204
EA
EA
EA
EA
Replacement vacuum for Clayton Vacuum
Sanding System.
For use in shops and hangers, electric.
For use in shops and hangers, pneumatic.
For use in confned areas, electric.
For use in confned areas, pneumatic.
X
X
Vaccum Sanding
System, DCM
(kit includes grinder,
vacuum shroud, hose
assembly, and disc
assortment)
Posi-Vac Starter Kit with
Grinder
151083 (Dotco
grinder)
151153 (Dynabrade
grinder)
EA
EA
Portable vacuum sanding system used to
remove corrosion or coatings. Captures
airborne particles and dust generated by
sanding operations.
X
X
Air Drill Motor with 1/4"
Chuck (3200 rpm)
OO-D-691
EA
Scuff sanding and corrosion removal. Use
with Bu±fng Wheel (see Table 2-1).
X
Drill Chuck Key, 1/4"
A-A-50966
EA
Securing or releasing drill bit. For use with
above drill motor.
X
Sander, Pneumatic,
Orbital Motion
(6,000-9,000 rpm)
A-A-2687
(supersedes
OO-S-101)
EA
Scuff sanding and corrosion removal. Also
used ±or fnish sanding, ±eather edging, and
blending of paint systems.
X
Sander, Random Orbital,
5" dia. sanding pad
(12,000 rpm)
Model 57015
(Dynabrade)
EA
Scuff sanding and corrosion removal.
Also used for blending, smoothing, and
feathering edges. The sander's random
orbital action prevents scratches and swirl
marks. Available in three orbit diameters:
3/8" (10 mm) for aggressive sanding , 3/16"
(5 mm) for general sanding, 3/32" (2.5 mm)
±or ultra-fne sanding.
X
Table 3-2. Corrosion Removal Equipment
Back to Top
