TM-1-1500-344-23-4
CONSUMABLE MATERIALS AND EQUIPMENT FOR AIRCRAFT AND AVIONICS VOLUME IV
TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL
SEPTEMBER 2013
TM-1-1500-344-23-4 - Page 62 of 92
3-4
NAVAIR 01-1A-509-4
TM 1-1500-344-23-4
01 September 2013
Table 3-1. Cleaning Equipment (Cont.)
Nomenclature
Specifcation/
Part No.
National Stock
Number
Unit
of
Issue
Intended Use
Usable
On
AC AV
CLEANING UNITS (CONT.)
Booth, Cleaning, Water
Base Solvent Spray
MIL-PRF-83831
EA
For the removal of dirt, dust, salt
spray deposits and light corrosion
products. For pre-cleaning of
components prior to ultrasonic
detergent cleaning.
For cleaning
and rinsing components after
ultrasonic detergent cleaning,
abrasive corrosion removal and
hand cleaning.
X
Mini-Vacuum Cleaner,
Pneumatic, Venturi-Type
AT560
EA
Removing dirt and debris.
X
X
Vacuum Cleaner with
attachments
Pneumatic
EA
Removing dirt and debris.
X
X
DRYING EQUIPMENT
Heat Gun, Electric
A-A-59435
Type I (350-500°F)
Type II (500 -750°F)
Type III (750-1000°F)
EA
EA
EA
To thaw or dry equipment/
components or shrink insulating
tubing associated with electrical
applications.
WARNING
Not explosion proof. Not authorized
for use on aircraft.
X
Heat Lamp, Tub Light
TLS-1750-C
Open Purchase
(Infratech)
EA
Used for drying aircraft components
or avionic equipment. Tub light
with three settings and adjustable/
movable base. Requires 7 R-40
120V, 250W infrared bulbs.
CAUTION
Lamp is hot enough to blister paint/
melt plastics. Place component 24"-
30" away from heat source.
X
Infrared Bulb
R-40
120V, 250W
EA
For use with Tub Light Heat Lamp.
X
Back to Top
