TM-1-4940-355-12-P
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM) P/N 50154-001, MOUNTED ON HIGH MOBILITY MULTI PURPOSE WHEELED VEHICLE (HMMWV) HEAVY (HVY) MODEL M1097A2
TECHNICAL MANUAL; OPERATOR’S AND UNIT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
SEPTEMBER 2003
TM-1-4940-355-12-P - Page 53 of 164
TM 1-4940-355-12&P
0015 00
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM)
SLIDER DOOR COMPONENT
INITIAL SETUP
Tools And Special Tools:
Tool Kit Acft. Maint., B01 (Table 2, WP 0025 00)
Materials/Parts:
100 Grit Paper, (Item 6, WP 0031 00)
Acetone, (Item 1, WP 0031 00)
Permabond Cyanoacrylate (Superglue) Adhesive,
(Item 2, WP 0031 00)
MIL-P-23377, Primer (Item 8, WP 0031 00)
MIL-C-22750, Number 34094 (Green 383) (Item 9,
WP 0031 00)
Number 8802 extrudable sealant (Item 4, WP 0031
00)
Personnel Required:
One MOS 67 Series or MOS 68 Series
References:
TM 1-1500-204-23-10
Repair Parts and Special Tools List (WP 0027 00)
TM 43-0139
Equipment Conditions:
SECM Assembled (WP 0020 00)
DISASSEMBLY
NOTE
Only disassemble as far as necessary to get to the part to be replaced.
1.
Open tailgate, then open back doors of SECM.
2.
Unlatch 2 slider door draw latches (1).
(Figure 1)
3.
Push upward (large arrow) on the back edge of slider door to disengage door (2) from latched position (3) to
sliding position (4).
4.
Slide door open until bolts (5) align with open slots (6) in rail, then raise door off Main Box (7).
2
5
3
4
6
MS019468
7
1
Figure 1.
Main Box Assembly Slider Door
0015 00-1
Back to Top
