TM-1-4940-355-12-P
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM) P/N 50154-001, MOUNTED ON HIGH MOBILITY MULTI PURPOSE WHEELED VEHICLE (HMMWV) HEAVY (HVY) MODEL M1097A2
TECHNICAL MANUAL; OPERATOR’S AND UNIT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
SEPTEMBER 2003
TM-1-4940-355-12-P - Page 61 of 164
TM 1-4940-355-12&P
0017 00
This WP supersedes WP 0017 00, dated 2 September 2003
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM)
OVERHEAD CARGO/MAINTENANCE RACK ASSEMBLY COMPONENTS
INITIAL SETUP
Tools and Special Tools:
Tool Kit Acft. Maint, B01 (Table 2, WP 0025 00)
Materials/Parts:
MIL-P-23377, Primer (Item 8, WP 0031 00)
MIL-C-22750, Number 34094 (Green 383) (Item 9, WP
0031 00)
Number 8802 extrudable sealant (Item 4, WP 0031 00)
Coating, Anti-Slip (Item 12, WP 0031 00)
Loctite, Sealing compound, blue (Item 10, WP 0031 00)
Loctite, Sealing compound, red (Item 11, WP 0031 00)
RTV, Sealing compound (Item 13, WP 0031 00)
Personnel required:
One MOS 67 series or
MOS 68 series
References:
TM 43-0139
WP 0012 00 Removal of Major Components
Equipment Conditions:
SECM assembled (WP 0020 00)
DISASSEMBLY
NOTE
Only disassemble as far as necessary to get to the part to be replaced.
1.
Fold vehicle side mirrors in, chock wheels and set brakes before work begins.
2.
Remove all contents from the Overhead Cargo/Maintenance Rack Assembly.
3.
Unlatch safety bars (1) and safety chains (2).
(Figure 1)
4.
Remove locking pin (3) from each handrail nest, extract handrails.
5.
Descend ladder (4) to ground.
Remove locking pins (5) from ladder (4).
6.
Lift ladder (4) from slots.
Change 1 – 15 March 2005
0017 00-1
Back to Top
