TM-1-4940-355-12-P
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM) P/N 50154-001, MOUNTED ON HIGH MOBILITY MULTI PURPOSE WHEELED VEHICLE (HMMWV) HEAVY (HVY) MODEL M1097A2
TECHNICAL MANUAL; OPERATOR’S AND UNIT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
SEPTEMBER 2003
TM-1-4940-355-12-P - Page 69 of 164
TM 1-4940-355-12&P
0018 00
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM)
SIDE BOX LEFT HAND COMPONENT
INITIAL SETUP
Tools and Special Tools:
Tool Kit Acft. Maint, B01 (Table 2, WP 0025 00)
Materials/Parts:
100 grit paper, (Item 6, WP 0031 00)
Acetone, (Item 1, WP 0031 00)
Permabond Cyanoacrylate (Superglue) Adhesive, (Item
2, WP 0031 00)
MIL-P-23377, Primer (Item 8, WP 0031 00)
MIL-C-22750, Number 34094 (Green 383) (Item 9, WP
0031 00)
Number 8802 extrudable sealant (Item 4, WP 0031 00)
Personnel Required:
One MOS 67 Series or MOS 68 Series
References:
TM 1-1500-204-23-10
Repair Parts and Special Tools List (WP 0027 00)
Equipment Conditions:
Side Box Removed From HMMWV (WP 0012 00)
DISASSEMBLY
1.
Remove 14 rivets (1) and hinge (2). (Figure 1)
2.
Remove 8 bolts (3), 8 nuts (4), 8 lock washers (5), 2 door stays (6) and door (7).
3.
Remove 7 rivets (8) and hasp and staple (9).
4.
Remove two shelves (10) from box.
Remove 8 rivets (11) and 4 shelf brackets (12) from shelves (10).
5.
Remove 4 bolts (13), 4 nuts (14), 8 lock washers (15), 4 flat washers (16), 4 rivets (17) and fuel can plate
(18).
6.
Remove 14 rivets (19) and 2 latches (20).
7.
Remove rivet (21), lanyard (22) and locking pin (23).
8.
Remove 10 rivets (24) and 2 handles (25), with 2 backing plates (26).
9.
Remove door seal (27).
0018 00-1
Back to Top
