TM-1-4940-355-12-P
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM) P/N 50154-001, MOUNTED ON HIGH MOBILITY MULTI PURPOSE WHEELED VEHICLE (HMMWV) HEAVY (HVY) MODEL M1097A2
TECHNICAL MANUAL; OPERATOR’S AND UNIT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
SEPTEMBER 2003
TM-1-4940-355-12-P - Page 77 of 164
TM 1-4940-355-12&P
0020 00
This WP supersedes WP 0020 00, dated 2 September 2003
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM)
ASSEMBLY OF MAJOR COMPONENTS
INITIAL SETUP
Tools and Special Tools:
Tool Kit Acft. Maint, B01 (Table 2, WP 0025 00)
References:
Service Upon Receipt (WP 0009 00)
Maintenance Allocation Chart (Table 1, WP 0025 00)
Repair Parts and Special Tools List (WP 0027 00)
TM 9-2320-280-10, TRUCK, UTILITY: HEAVY
VARIANT, 4X4, M1097 (2320-01-346-9317) (EIC:
BBM); M1097A1
Personnel Required:
Six MOS 67 Series or MOS 68 Series
Equipment Conditions:
SECM Removed From HMMWV
VEHICLE PREPARATION
1.
Verify HMMWV is prepared to receive SECM according to WP 0009 00, Service Upon Receipt.
2.
Chock wheels and set brakes.
INSTALLATION
1.
Lay out and inventory SECM container components as listed in Table 1, WP 0030 00.
2.
Install new rear cab curtain loosely. (Figure 1)
Do not tighten until main box is installed.
Follow instructions
contained in TM 9-2320-280-10.
Back to Top
