TM-1-4940-355-12-P
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM) P/N 50154-001, MOUNTED ON HIGH MOBILITY MULTI PURPOSE WHEELED VEHICLE (HMMWV) HEAVY (HVY) MODEL M1097A2
TECHNICAL MANUAL; OPERATOR’S AND UNIT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
SEPTEMBER 2003
TM-1-4940-355-12-P - Page 63 of 164
TM 1-4940-355-12&P
0017 00
Strapping Replacement -
Remove/install rivet (1) to replace Velcro strap (2) or web strap (3).
(Figure 3)
3
MS023093
1
2
1
Figure 3.
Strapping Replacement
NOTE
Apply Loctite sealing compound to all bolts before installation and apply
RTV waterproofing compound around all bolt holes on main box
assembly.
Rear Angle Support
Replacement
Removal
1.
Remove Overhead Cargo/Maintenance Rack Assembly according to WP 0012 00.
2.
Remove 2 outer bolts (1), lock washers (2) and flat washers (3) from the angle support bracket (4). (Figure 4)
Installation
1.
Connect the replacement angle support bracket (4) with 2 bolts (1), lock washers (2) and flat washers (3).
Change 1
0017 00-3
Back to Top
