TM-10-5411-233-13-P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
SEPTEMBER 2002
TM-10-5411-233-13-P - Page 111 of 356
TM 10-5411-233-13&P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER
0013 00
UNIT MAINTENANCE
0013 00-7
Insert the hex wrench
(2)
into the socket
(8)
at the top of the installation tool
(1)
. Insert the jaws of the
adjustable or fixed wrench
(3)
on the flat-sided center section
(9)
of the installation tool
(1)
.
While holding the hex wrench
(2)
stationary and the installation tool
(1)
at a right angle to the vehicle bed
(7)
, turn the wrench
(3)
in a clockwise direction keeping track of the number of turns.
Turn the nut
(3)
in a clockwise direction until firm resistance indicates that the fastener is completely set.
This will be approxmately 1-1/2 to 2 turns.
Once the Rivnut is completely set, turn the wrench
(3)
in a counter-clockwise direction to break its grip
with the Rivnut. Remove both wrenches
(2,3)
from the installation tool
(1)
.
Remove the Rivnut installation tool
(1)
from the Rivnut by turning the entire tool by hand in a counter-
clockwise direction.
Install all remaining Rivnuts in a similar manner.
5
4
STEP 2
6
STEP 1
1
7
2
1
STEP 4
STEP 3
9
8
3
4
Back to Top
