TM-10-5411-233-13-P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

SEPTEMBER 2002

TM-10-5411-233-13-P - Page 107 of 356

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER

0013 00

UNIT MAINTENANCE

0013 00-3

To determine the proper mounting position for the CBC on the vehicle bed from front to back, lower the

CBC into position on the vehicle bed so that the forward end of the upper section

(1)

is 1.4

!

.13 inches

back (3.0 inches

!

.13 from the lower section) from the inside front wall of truck bed

(2)

of the vehicle. Do

not remove the hoisting sling at this time since it will be necessary to remove the CBC from the vehicle

bed in a later step.

To correctly position the CBC with respect to the vehicle bed from left to right, the CBC is centered on the

bed of the vehicle by ensuring that the distance from the CBC side walls

(3)

to the outer edge of the

vehicle bed

(4)

is equal at all four corners.

1

2

1.4 inches

+/- .13

3

4

Position the CBC on

the vehicle bed so that

each side of the CBC is

the same distance

away from the edge of

the vehicle bed at the

four corners

Top view of 2 1/2 T

Cargo Truck with

CBC positioned on

rear bed