TM-10-5411-233-13-P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
SEPTEMBER 2002
TM-10-5411-233-13-P - Page 92 of 356
TM 10-5411-233-13&P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER
0010 00
SERVICE UPON RECEIPT
0010 00-2
prior to removing the mounting kit container from the shipping palette
(1)
.
2
3
5
4
1
INSTALLATION OF MOUNTING KITS
The Cargo Bed Cover is designed to be used on three different types of vehicles, the M35A2, 2 1/2 T
Cargo Truck, the M1078, 2 1/2 T LMTV, and the M1082, 2 1/2 T LMTV Trailer.
Each type of vehicle requires that a different mounting kit be installed
BEFORE
the CBC can be mounted.
Refer to the table below to determine what mounting kit is required for each vehicle type. Also included in
the table is a reference to the Unit Maintenance work package that describes the installation of that
particular mounting kit.
The M35A2, 2 1/2 T Cargo Truck also requires the application of a Ladder Installation Kit. The Ladder
installation may be applied before or after the installation of the CBC onto the M35A2 Cargo Truck. The
M1078, 2 1/2 T LMTV and the M1082, 2 1/2 T LMTV Trailer do not require the installation of a ladder.
Refer to WP 0016 entitled “LADDER INSTALLATION” for complete information on the installation of the
ladder assembly on the M35A2, 2 1/2 T Cargo Truck.
Table 1. Vehicle Type and Mounting Kit Reference
Vehicle Type
Mounting Kit
TM Work Package Describing Installation
M35A2, 2 1/2 T Cargo Truck
17-1-0050-1
WP 0013
M1078, 2 1/2 T LMTV
17-1-0221-1
WP 0014
M1082, 2 1/2 T LMTV Trailer
17-1-0222-1
WP 0015
END OF WORK PACKAGE
Back to Top
