TM-3-1040-279-12-P

GENERATOR SET, SMOKE, MECHANICAL: PULSE JET, M157 W/120 GAL FOG OIL TANK AND W/80 GAL FOG OIL TANK

TECHNICAL MANUAL; OPERATOR’S AND ORGANIZATIONAL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND DEPOT MAINTENANCE REPAIR PARTS

MAY 1987

TM-3-1040-279-12-P - Page 102 of 389

TM 3-1040-279-12&P

4-11 COVER ASSEMBLY (CONT).

a. Solenoid Valve L101.

REMOVAL

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

Disassemble cover assembly (P. 4-36).

Deleted.

Remove eight screws (4) and washers (5), and remove equipment container panel (6).

Remove wire leads of solenoid valve L101 from terminal board TB12 (7) and relay K101 (8).

See smoke generator wiring (P. 4-34),

Remove two screws (9), washers (10), and motor cover (11) from cover assembly (12).

Disconnect and remove pump return tube assembly (13) from elbow (14) and cross (15)

connection.

Disconnect fuel pressure hose assembly (16) from elbow (17).

Disconnect fuel return tube assembly (18) from cross (15) connection.

Disconnect and remove solenoid inlet tube assembly (19) from elbow (20) and tee (21).

Disconnect and remove pump pressure tube assembly (23) from fuel test adapter (24) and

tee (21).

Hold fitting on solenoid with wrench and remove elbow (25) as an assembly from solenoid

valve (22).

Disconnect fuel hose assembly (1) from fuel filter (26).

Remove two screws (27), washers (28), and solenoid valve (22) from cover assembly (12).

Remove fuel filter (26) from elbows (30).

Remove elbow (29) with elbows (30) as an assembly from solenoid valve (22).

Remove tee (21) from solenoid valve (22).

4-38

Change 3