TM-5-2330-325-13-P

SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014
TM-5-2330-325-13-P

  TM-5-2330-325-13-P - Page 225 of 648

FIELD MAINTENANCE
WIRING HARNESS REPLACEMENT
INITIAL SETUP:
References
WP 0043
WP 0096
Equipment Condition
Semitrailer parked on level ground (WP 0005)
WARNING
Remove all power to semitrailer prior to making any repairs on the electrical system.
Failure to comply may result in death or injury to personnel. Seek medical attention in the
event of an injury.
NOTE
•
Wiring harnesses can be replaced or repaired depending on the type of damage.
Broken wires can be spliced and sealed with heat shrink tubing or electrical tape.
•
For Wiring Harness and Cable Repair, see (WP 0043).
REPLACEMENT
Wiring harnesses are not ordinarily removed unless they are badly damaged and must be replaced. Wiring
harness connections must be tightly attached and connected. For additional information, see wiring
diagrams (WP 0096).
END OF TASK
FOLLOW ON TASK
Connect power source and test electrical system for proper operation.
END OF TASK
END OF WORK PACKAGE
TM 5-2330-325-13&P
0050
0050-1/blank


Back to Top