TM-5-2330-325-13-P

SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-2330-325-13-P - Page 222 of 648

REMOVAL

1.

Slide boot (Figure 1, Item 3) off of connector (Figure 1, Item 5) at rear of receptacle (Figure 1, Item 6).

2.

Remove two self-locking nuts (Figure 1, Item 1) from rear of receptacle (Figure 1, Item 6). Discard

self-locking nuts (Figure 1, Item 1).

3.

Turn connector (Figure 1, Item 5) clockwise and remove from receptacle (Figure 1, Item 6).

4.

Tag and disconnect wires (Figure 1, Item 4) from connector (Figure 1, Item 5).

5.

Remove two screws (Figure 1, Item 8), washers (Figure 1, Item 7), and receptacle (Figure 1, Item 6) from

gooseneck (Figure 1, Item 2).

466-0043

6

2

1

3

7

4

5

8

Figure 1.

12-volt Receptacle Replacement.

END OF TASK

INSTALLATION

1.

Install receptacle (Figure 1, Item 6) on gooseneck (Figure 1, Item 2) with two screws (Figure 1, Item 8),

washers (Figure 1, Item 7), and new self-locking nuts (Figure 1, Item 1).

2.

Connect wires (Figure 1, Item 4) to connector (Figure 1, Item 5) as tagged during removal.

3.

Insert connector (Figure 1, Item 5) in receptacle (Figure 1, Item 6) and turn counterclockwise to set.

4.

Slide boot (Figure 1, Item 3) over connector (Figure 1, Item 5).

END OF TASK

FOLLOW ON TASK

Connect power source and test electrical system for proper operation.

END OF TASK

END OF WORK PACKAGE

TM 5-2330-325-13&P

0048

0048-2