TM-5-2330-325-13-P
SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-2330-325-13-P - Page 214 of 648
REMOVAL
1.
Push taillight lens (Figure 1, Item 1) inward until it pushes through rubber grommet (Figure 1, Item 2) and
falls into semitrailer body.
2.
Separately withdraw rubber grommet (Figure 1, Item 2) and lens (Figure 1, Item 1) through taillight
mounting opening.
3.
Release electrical connector locking tab (Figure 1, Item 4) and separate lens (Figure 1, Item 1) from
connector (Figure 1, Item 3).
466-0044
3
4
1
2
Figure 1.
Taillight Replacement.
END OF TASK
INSTALLATION
1.
Position rubber grommet (Figure 1, Item 2) in taillight mounting opening and rotate rubber grommet so that
word “TOP” is uppermost.
2.
Connect electrical connector (Figure 1, Item 3) to rear of taillight lens (Figure 1, Item 1) and secure with
locking tab (Figure 1, Item 4).
NOTE
Lens should be evenly aligned with grommet before pushing. Liquid soap may be used to
lubricate the grommet.
3.
Align taillight so that electrical connector is at bottom and push lens (Figure 1, Item 1) into rubber grommet
(Figure 1, Item 2) until it seats in place.
END OF TASK
FOLLOW ON TASK
Connect power source and test electrical system for proper operation.
END OF TASK
END OF WORK PACKAGE
TM 5-2330-325-13&P
0045
0045-2
Back to Top
