TM-5-2330-325-13-P

SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-2330-325-13-P - Page 207 of 648

IDENTIFICATION BAND REPLACEMENT

1.

Remove identification band (Figure 2, Item 2) from wire lead (Figure 2, Item 1). Discard identification band

(Figure 2, Item 2).

2.

Using electrical etcher, mark new identification tag (Figure 2, Item 2).

3.

Install new identification band (Figure 2, Item 2) on wire lead (Figure 2, Item 1).

4.

Secure new identification band (Figure 2, Item 2) to wire lead (Figure 2, Item 1) by bending tab

(Figure 2, Item 3).

466_0125

1

2

3

Figure 2.

Identification Band Replacement.

END OF TASK

TERMINAL REPLACEMENT

1.

Remove terminal (Figure 3, Item 1) from wire lead (Figure 3, Item 2). Discard terminal (Figure 3, Item 1).

CAUTION

Remove only enough insulation to fill cavity on new terminal. Failure to comply may result

in damage to, or destruction of, equipment or mission.

2.

Remove insulation (Figure 3, Item 3) from wire lead (Figure 3, Item 2).

3.

Using crimp tool, install new terminal (Figure 3, Item 1) on wire lead (Figure 3, Item 2).

4.

Connect intervehicular connector and check for proper operation (WP 0005).

466_0126

1

2

3

Figure 3.

Terminal Replacement.

END OF TASK

TM 5-2330-325-13&P

0043

0043-5