TM-5-2330-325-13-P

SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-2330-325-13-P - Page 208 of 648

MALE CONNECTOR REPAIR

1.

Position shell (Figure 4, Item 5) from contact (Figure 4, Item 1) and remove washer (Figure 4, Item 4) from

insulation (Figure 4, Item 3).

2.

Remove wire contact (Figure 4, Item 1) from wire lead (Figure 4, Item 2). Discard contact (Figure 4, Item 1).

CAUTION

Remove only enough insulation to fill cavity on new terminal. Failure to comply may result

in damage to, or destruction of, equipment or mission.

3.

Remove insulation (Figure 4, Item 3) from wire lead (Figure 4, Item 2).

4.

Using crimp tool, install new contact (Figure 4, Item 1) on wire lead (Figure 4, Item 2).

5.

Install washer (Figure 4, Item 4) on insulation (Figure 4, Item 3) and position shell (Figure 4, Item 5) over

contact (Figure 4, Item 1).

6.

Connect intervehicular connector and check for proper operation (WP 0005).

466_0127

1

2

3

4

5

Figure 4.

Male Connector Repair.

END OF TASK

TM 5-2330-325-13&P

0043

0043-6