TM-5-2350-262-20-2

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 2 OF 3

TM-5-2350-262-20-2 - Page 502 of 670

TM 5-2350-262-20-2

Change 3

4-855

I

Loosen ten locknuts (10) on studs (11) of No. 1

roadwheel (2)

CAUTION

Place SPRUNG/UNSPRUNG lever

between positions.

Failure to comply

may result in damage to actuators.

J

Place hydraulic jack behind roadwheel arm

(12), and raise roadwheel arm (12) until No. 1

roadwheel (2) clears center guides of track (6).

K

Remove ten locknuts (10), washers (13), outer

roadwheel (14), and inner roadwheel (15) from

studs (11).

L

Loosen ten locknuts (16) on studs (17) of

roadwheel (18).

CAUTION

Place SPRUNG/UNSPRUNG lever

between positions.

Failure to comply

may result in damage to equipment.

M

Place hydraulic jack behind roadwheel arm (19)

and raise roadwheel arm (19) until roadwheel

(18) clears center guides of track (6).

N

Connect chain and chain hoist to rear lifting eye

shackle (20), top of ejector or other suitable

location, and to track (6).

O

Raise track (6) until center guides of track (6)

clear roadwheel (18).

P

Remove ten locknuts (16), washers (21), outer

roadwheel (22), and inner roadwheel (23) from

studs (17).

Q

Remove hydraulic jack from roadwheel arm

(19).