TM-5-2350-262-20-2

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 2 OF 3

TM-5-2350-262-20-2 - Page 507 of 670

TM 5-2350-262-20-2

4-860

Change 3

R

Lower roadwheel arm (1) and remove hydraulic

jack, chain hoist, and chain from vehicle.

S

Start vehicle engine (TM 5-2350-262-10), and

place suspension control lever in SPRUNG

mode.

Stop vehicle engine.

T

Referring to torque sequence, tighten lock-nuts

(2) to 190 lb-ft (258 N

·

m

).

CAUTION

Place SPRUNG/UNSPRUNG lever

between positions.

Failure to comply

may result in damage to actuators.

U

Position hydraulic jack under No. 1 roadwheel

arm (3), and raise No. 1 roadwheel arm (3) to

gain clearance for installation of roadwheel.