TM-5-2350-262-20-2

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 2 OF 3

TM-5-2350-262-20-2 - Page 511 of 670

TM 5-2350-262-20-2

4-864

Change 4

CAUTION

At least 1/16 in. (1.6 mm) of thread on

track pin must extend through locknut.

Failure to comply may result in damage

to track pin and locknuts.

AO

Tighten locknuts (1) and (7) to 120-160 lb-ft

FOLLOW-ON TASK:

Adjust track tension (TM 5-2350-262-10).

AL

Loosen locknut (1) three turns.

Drive track pin

(2) into track shoe (3) until washer (4) is flush

against track shoe (3).

AM

Remove two track connecting fixtures form

track (5).

AN

Install washer (6) and locknut (7) on hull end

of track pin (2).

Stop vehicle engine

(TM 5-2350-262-10), and relieve hydraulic

pressure (TM 5-2350-262-20-1).

240-270

(325-366 N-m).