TM-5-2350-262-20-3
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 3 OF 3; HYDRAULIC TROUBLESHOOTING TEST PROCEDURES
TM-5-2350-262-20-3 - Page 116 of 319
3-81
TM 5-2350-262-20-3
EJECTOR CONTROL VALVE ADJUSTMENT
•
With engine still at idle speed and EJECTOR CONTROL lever in FORWARD position,
loosen jamnut (1) on ejector control valve and turn adjusting screw (2) clockwise to
increase pressure; counterclockwise to decrease pressure. Pressure should be 1,950-
2,050 psi (13,445-14,135 kPa).
•
Stop engine; relieve hydraulic pressure.
Remove all test equipment and connect
hoses.
Refer to TM 5-2350-262-20-2.
EJECTOR CONTROL VALVE
Back to Top
