TM-5-2350-262-20-3
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 3 OF 3; HYDRAULIC TROUBLESHOOTING TEST PROCEDURES
TM-5-2350-262-20-3 - Page 242 of 319
3-207
TM 5-2350-262-20-3
FLOW FROM CONTROL VALVE TEST
NOTE
Have suitable container ready to catch oil.
•
Start engine.
Remove cap (1) from hydraulic system sample valve (2).
•
Open valve (2) by turning it clockwise.
Hold valve (2) open for several seconds.
Oil
should flow freely from sample valve (2).
•
Close valve (2) and replace cap (1).
Stop engine; relieve hydraulic pressure.
Refer to TM 5-2320-262-20-2.
Back to Top
