TM-5-2350-262-20-3

BILGE PUMP CONTROL VALVE (24)

When activated, pressurizes bilge pump circuit at 1,450-1,550 psi

(9,998-10,687 kPa) and starts bilge pump action.

RIGHT PUMP CONTROL VALVE (13R)

Receives oil flow from the main hydraulic pump and maintains pressure

at 3,950-4,050 psi (27,235-27,925 kPa) for right-side hydraulic functions.

LEFT PUMP CONTROL VALVE (13L)

Receives oil flow from main hydraulic pump and maintains pressure at

3,950-4,050 psi (27,235-27,925 kPa).

RIGHT SUSPENSION CONTROL VALVE (3R/17R)

Port 3R, front bottom of valve, raises the right front-side of

vehicle. Port 17R, above port 3R, lowers right front-side of vehicle. Relief valve is set at 3,450-3,550 psi (23,788-

24,477 kPa).

LEFT SUSPENSION CONTROL VALVE (3L/17L)

Port 3L, front bottom of valve, raises the left front-side of

vehicle. Port 17L, above port 3L, lowers the left front-side of vehicle. Relief valve is set at 3,450-3,550 psi

(23,788 - 24,477 kPa).

APRON RAISE/LOWER CONTROL VALVE (19/20)

Port 19, front top of valve, actuates circuit and raises apron.

Port 20, below port 19, actuates circuit and lowers apron. Relief valve No. 19 is set at 4,450-4,550 psi (30,683-

31,372 kPa) and relief valve No. 20 is set at 1,950-2,050 psi (13,445-14,135 kPa).

WINCH CONTROL VALVE (C1/C2)

Port C1, front bottom of valve, actuates circuit and moves cable out of winch,

Port C2, above port C1, brings cable into winch. Relief valve is set at 1,950-2,050 psi (13,445-14,135 kPa) on the

winch.

EJECTOR CONTROL VALVE (21/22)

Port 21, front top of valve, actuates circuit and moves ejector forward. Port

22, below port 21, actuates and moves the ejector back. Relief valve is set at 1,950-2,050 psi

(13,445-14,135 kPa).

Change 2

2-5

TM-5-2350-262-20-3 - Page 28 of 319