TM-5-2350-378-23-P
ARMORED COMBAT EARTHMOVER (ACE), M9; HYDRAULIC DIAGNOSTIC CENTER
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2012
TM-5-2350-378-23-P - Page 228 of 644
HYDRAULIC OIL OVERHEATS - Continued
STEP
19.
Perform ejector relief valve adjustment using HDC.
a.
Stop engine and relieve hydraulic pressure.
b.
Reset all HDC solenoid valves by selecting RESET VALVES button (Figure 23, Item 5) on HDC control
box.
T01337HDC
5
4
3
1
2
Figure 23.
Hydraulic Diagnostic Center (HDC) Control Box.
WARNING
•
Do not operate ejector when personnel are in bowl. Do not work in bowl unless
ejector lock is engaged. Failure to comply may result in severe injury or death to
personnel.
•
Do not stand or work in bowl area unless ejector lock is engaged. Do not stand in
bowl to observe roller guide travels. Failure to comply may result in severe injury or
death to personnel.
•
When folding dozer blade, work on blade latches from side of vehicle only. Do not
stand in front of dozer blade while retracting ejector. Failure to comply may result in
severe injury or death to personnel.
c.
Disable ejector; manually close V23 (Figure 24, Item 1) on DCV bank.
TM 5-2350-378-23&P
0015
0015-26
Back to Top
