TM-5-2815-241-34-P
ENGINE, DIESEL NTC-290
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MARCH 1987
TM-5-2815-241-34-P - Page 157 of 738
TM 5-2815-241-34&P
EXHAUST MANIFOLD INSTALLATION - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
4.
Twelve screws (6
Using 1/2-inch drive 5/8-inch socket, 6-
and 9)
inch extension, and 0 to 150 ft lb (0 to 210
N•m) torque wrench, torque to 25 ft lb
(34 N•m).
WARNING
Safety goggles must be worn to prevent eye injury caused by flying steel chips.
5.
Four new nut locking
plates (4) and four
new key washers (8)
Using 16-ounce ball-peen hammer and
1/2-inch cold chisel, bend up tabs of new
nut locking plates and new key washers.
TASK ENDS HERE
TA 242423
2-135
Back to Top
