TM-5-2815-241-34-P

ENGINE, DIESEL NTC-290

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

MARCH 1987

TM-5-2815-241-34-P - Page 149 of 738

TM 5-2815-241-34&P

ENGINE OIL COOLER INSTALLATION

INITIAL SETUP

Tools

Materials/Parts - Continued

Extension, 6-inch, 1/2-inch drive

Handle, ratchet, 1/2-inch drive

Socket, 9/16-inch, 1/2-inch drive

Socket, 3/4-inch, 1/2-inch drive

Socket, 7/16-inch, 1/2-inch drive

Wrench, box-end, 7/16-inch

Wrench, torque, 0 to 150 ft lb (0

to 210 N•m), 1/2-inch drive

Gasket, water header cover

Lockwasher, oil cooler, front (six required)

Lockwasher, oil cooler, rear

Lockwasher, water header cover (six

required)

Oil, lubricating (item 12, appendix B)

Packing, preformed, water transfer tube

(two required)

Packing, preformed, oil filter

Materials/Parts

Personnel Required

Cartridge, oil filter

Gasket, oil cooler

Two

2-127