TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 211 of 894

TRUCK SERVICE MANUAL

BRAKES-AIR

ASSEMBLE

A.

Clean all parts thoroughly and inspect.

Check

angled faces of wedge to see that they are free from

pits or marks.

If "E" washer type lock is used,

inspect wedge shaft lock groove to see that it is

sharp and clean.

Inspect roller retainer cage to

make sure it will contain rollers properly and inspect

the spring for marks that would cause breakage.

Replace parts if necessary.

B.

Insert wedge shaft into roller retainer cage so

angled faces of the wedge head are exposed.