TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 239 of 894

BRAKES-PARKING

MOTOR TRUCK SERVICE MANUAL

Examine service brake diaphragm.

Replace if worn,

damaged or over one year old.

REASSEMBLY

1. Position piston assembly, spring and head in a

press as shown in Fig.

16.

Thread release bolt

into piston so that bolt may be used to align

piston with bore in head, Fig.

19.

Fold a small

square of emery cloth (abrasive side against

press and tool) to serve as a nonslip pad

between the press ram and tool, Fig.

14.

CAUTION:

Be certain that components are

aligned with press ram so that when pressure is

applied from press, spring does not "kickout".

Slowly compress assembly.

Remove release

bolt after pistbn is aligned with bore in head.