TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 237 of 894

BRAKES-PARKING

MOTOR TRUCK SERVICE MANUAL

tion, use a soft hammer to bump the head carefully to

loosen since head may be stuck in place by foreign

material, sealer, or corrosion.

If difficulty in removing

head is still experienced, use the three mill notches

equispaced around the cylinder head for prying head

from cylinder case (Fig.

12).

Use a screwdriver or

similar tool carefully at each notch in turn so that cylinder

head does not become cocked.