TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 624 of 894

TRUCK SERVICE MANUAL

SPRINGS

Installing Center Sleeve and Bushing

1.

Apply a thin coat of white lead to outside diameter of

sleeve and bushing assembly.

Support beam in press.

Using adapter, press

bushing and sleeve assembly into beam.

See Fig.

11.

Bushing and sleeve assembly should be

centered in beam.