TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 785 of 894

TRUCK SERVICE MANUAL

TRANSMISSION

ASSEMBLY

Para 7-6

b. Gear Unit, Second Clutch, Center Support

(1)

Attach lifting bracket 16 (Fig. 4-2) to the

assembled gear unit (Fig. 7-14).

Lower the gear unit

carefully, aligning the pinions of the rear planetary to

mesh with the rear planetary ring gear.

(2)

Install the second clutch plate pack

removed in a(8) above.

The thinner external tanged

plates should all be toward the rear of the transmission

housing (refer to para7-2b).

Begin with an external-

tanged plate (Fig. 7i5) and alternately install seven

external-tanged and six internal-splined plates.

(3)

Install the snapring that retains the second

clutch pack (Fig. 7-16).

(4)

Install the third clutch piston assembly into

the center support.

The lips of the sealrings must be

toward the cavity in the