TM 5-3805-254-20-1
THERMOSTAT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
7.
Torque converter
Thermostat housing
a.
Put on thermostat housing.
cooler (7)
(1), five screws
b.
Screw in and tighten using 9/16-inch,
(8), and new lock-
1/2-inch drive socket, 6-inch extension
washers (9)
and ratchet handle.
8.
Radiator (4)
Hose clamps (5) and
a.
Put on hose clamps.
radiator hose (6)
b.
Put on radiator hose.
c.
Tighten hose clamps using 1/4-inch
flat-tip screwdriver.
9.
Thermostat
Hose clamps (2) and
a.
Put on hose clamps.
housing (1)
radiator hose (3)
b.
Put on radiator hose.
c.
Tighten hose clamps using 1/4-inch
flat-tip screwdriver.
NOTE
FOLLOW-ON MAINTENANCE:
1.
Refill cooling system (page 2-628).
2.
Close left and right side hood panels (page 2-424).
TASK ENDS HERE
2-635