TM-5-3805-254-20-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 2 OF 2

JANUARY 1988
TM-5-3805-254-20-2

  TM-5-3805-254-20-2 - Page 591 of 971

TM 5-3805-254-20-2
REAR HUB AND BRAKEDRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT - CONTINUED
25
Rear hub (1) and
a Position rear hub on wood blocks with
brakedrum (2)
axle flange studs (3) facing down.
b Position brakedrum on rear hub facing
up.
c Aline hub stud holes.
26
Brakedrum (2)
Hub stud (4)
a Put into hub stud hole.
b Drive in using 3-pound cross-peen
hammer and brass driftpin punch.
Make sure hub stud is flush against
brakedrum.
27
Rear hub (1)
Inner bearing
a Position rear hub on wood blocks with
cup (5)
axle flange studs (3) facing down.
b Using puller, pull out.
c Get rid of.
TA244450
2-1196


Back to Top