TM-5-3805-254-20-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 2 OF 2

JANUARY 1988

TM-5-3805-254-20-2 - Page 592 of 971

TM 5-3805-254-20-2

REAR HUB AND BRAKEDRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

28

New inner bearing

a Position level and square.

cup (5)

b Drive in until flush with top of rear hub

using wood block and 3-pound cross-

peen hammer.

c Seat completely by tapping on alternate

sides using brass driftpin punch and 3-

pound cross-peen hammer.

Make sure inner bearing cup is flush

with machined surface inside rear

hub.

29

Outer bearing

a Position brakedrum (2) on wood blocks

cup (6)

with axle flange studs (3) facing up.

b Using puller, pull out.

c Get rid of.

30

New outer bearing

a Position level and square.

cup (6)

b Drive in until flush with top of rear hub

using wood block and 3-pound cross-

peen hammer.

c Seat completely by tapping on alternate

sides using brass driftpin punch and 3-

pound cross-peen hammer.

Make sure outer bearing cup is flush

with machined surface inside rear

hub.

TA244451

2-1197