TM-5-3805-254-34P
TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS
MARCH 1992
TM-5-3805-254-34P - Page 12 of 633
TM 5-3805-254-34P
H -
General support is the lowest level that can do
complete repair of the item.
L -
Specialized repair activity is the lowest level
that can do complete repair of the item.
D-
Depot
is the lowest level that can do
complete repair of the item.
Z-
Nonrepairable No repair is authorized.
B -
No repair is authorized
(No parts or special
tools are authorized for the maintenance of a
"B"-coded item.) However, the item may be
reconditioned by adjusting, lubricating, etc., at
the user level.
(3) Recoverability Code.
Recoverability codes
are assigned to items to indicate the disposition action
on unserviceable items.
The recoverability code is
entered in the fifth position of the SMR code as follows:
Code
Application/Explanation
Z-
Nonrepairable item.
When unserviceable,
condemn and dispose of the item at the level of
maintenance shown in the 3d position of the
SMR code.
O-
Reparable
item.
When
uneconomically
reparable, condemn and dispose of the item at
unit maintenance or aviation unit level.
F-
Reparable
item.
When
uneconomically
reparable, condemn and dispose of the item at
the direct support or aviation intermediate level.
H-
Reparable
item.
When
uneconomically
reparable, condemn and dispose of the item at
the general support level.
D-
Reparable item.
When beyond lower level
repair
capability,
return
to
depot.
Condemnation and disposal of item not
authorized below depot level.
L -
Reparable
item.
Condemnation
and
specialized repair activity (SRA).
A -
Item requires special handling or condem-
nation procedures because of specific reasons
(e.g., precious metal content, high dollar value,
critical material, or hazardous material).
Refer
to appropriate manuals/directives for specific
instructions.
c.
CAGEC (Column (3)).
The Commercial and
Government Entity (CAGE) Code (C) is a 5-digit
alphanumeric code which is used to identify the
manufacturer, distributor, or Government agency, etc.,
that supplies the item.
d.
PART NUMBER (Column (4)).
Indicates
the primary number used by the manufacturer
(individual, company, firm, corporation, or Government
activity), which controls the design and characteristics of
the item by means of its engineering drawings,
specifications standards, and inspection requirements to
identify an item or range of items.
NOTE: When you use an NSN to requisition an item, the
item you receive may have a different part number from
the part ordered.
e.
DESCRIPTION AND USABLE ON CODE
(UOC) (Column (5)).
This column includes the following
information:
(1)
The Federal item name and, when
required,
a minimum description to identify the item.
(2)
Physical security classification.
Not
Applicable.
(3)
Items that are included in kits and
sets are listed below the name of the kit or set on Figure
KIT.
(4)
Spare/repair parts that make up an
assembled item are listed immediately following the
assembled item line entry.
(5)
Part numbers for bulk materials are
referenced in this column in the line item entry for the
item to be manufactured/fabricated.
(6)
When the item is not used with all
serial numbers of the same model, the effective serial
numbers are shown on the last line(s) of the description
(before UOC).
(7)
The usable on code, when applicable
(see paragraph 5, Special Information).
(8)
In the Special Tools List section, the
basis of issue (BOI) appears as the last line(s) in the
entry for each special tool, special TMDE, and other
special sup- port equipment.
When density of
equipments supported exceeds density spread indicated
in the basis of issue, the total authorization is increased
proportionately.
(9)
The statement "END OF FIGURE" appears
just below the last item description in Column 5 for a
given figure in both Section II and Section III.
f.
QTY (Column (6)).
The QTY (quantity per figure
column) indicates the quantity of the item used in the
breakout shown on the illustration/figure, which is
prepared for a functional group, subfunctional group, or
an assembly.
A "V" appearing in this column in lieu of a
quantity indicates that the quantity is variable and the
quantity may vary from application to application.
4.
Explanation of Columns
(Section IV).
a.
NATIONAL
STOCK
NUMBER
(NSN)
INDEX.
(1)
STOCK NUMBER column.
This column
lists the NSN by National Item Identification Number
(NIIN)
3
Back to Top
