TM-5-3805-254-34P
TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS
MARCH 1992
TM-5-3805-254-34P - Page 13 of 633
TM 5-3805-254-34P
sequence.
The NIIN consists of the last nine
NSN
I
digits of the NSN (i.e.,
When
NIIN
using this column to locate an item, ignore the first 4
digits of the NSN.
However, the complete NSN should
be used when ordering items by stock number.
(2)
FIG.
column.
This column lists the
number of the figure where the item is identified/located.
The figures are in numerical order in Section II and
Section III.
(3)
ITEM column.
The item number identifies
the item associated with the figure listed in the adjacent
FIG.
column.
This item is also identified by the NSN
listed on the same line.
b.
PARTNUMBER INDEX.
Part numbers in this
index are listed by part number in ascending
alphanumeric sequence (i.e., vertical arrangement of
letter and number combination which places the first
letter or digit of each group in order A through Z,
followed by the numbers 0 through 9 and each following
letter or digit in like order).
(1)
CAGEC column.
The Commercial and
Government Entity (CAGE) Code (C) is a 5-digit
alphanumeric code used to identify the manufacturer,
distributor, or Government agency, etc., that supplies
the item.
(2)
PART NUMBER column.
Indicates the
primary number used by the manufacturer (individual,
firm, corporation, or Government activity), which
controls the design and characteristics of the item by
means of its engineering drawings, specifications
standards, and inspection requirements to identify an
item or range of items.
(3)
STOCK NUMBER column.
This column
lists the NSN for the associated part number and
manufacturer identified in the PART NUMBER and
CAGE columns to the left.
(4)
FIG.
column.
This column lists the
number of the figure where the item is identified/located
in Sec- tions II and III.
(5) ITEM column.
The item number is that
number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
c.
FIGURE AND ITEM NUMBER INDEX.
(1)
FIG.
column.
This column lists the
number of the figure where the item is identified/located
in Sec- tions II and III.
(2)
ITEM column.
The item number is that
number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
(3)
STOCK NUMBER column.
This column
lists the NSN for the item.
(4)
CAGE column.
The Commercial and
Government Entity (CAGE) is a 5-digit alphanumeric
code used to identify the manufacturer, distributor, or
Government agency, etc., that supplies the item.
(5)
PART NUMBER column.
Indicates the
primary number used by the manufacturer (individual,
firm, corporation, or Government activity), which
controls the design and characteristics of the item by
means of its engineering drawings, specifications
standards and inspection requirements to identify an
item or range of items.
5.
Special Information.
a.
USABLE ON CODE.
The usable on code
appears in the lower left corner of the Description
column heading.
Not Applicable.
b.
FABRICATION
INSTRUCTIONS.
Bulk
materials required to manufacture items are listed in the
Bulk Material Functional Group of this RPSTL.
Part
numbers for bulk materials are also referenced in the
Description column of the line item entry for the item to
be manufactured/fabricated.
Detailed fabrication
instructions for items source coded to be manufactured
or fabricated are found in TM 5-3805-254-20 and TM 5-
3805-254-34.
c.
ASSEMBLY
INSTRUCTIONS.
Detailed
assembly instructions for items source coded to be
assembled from component spare/repair parts are found
in TM 5-3805-254-20 and TM 5-3805-254-34.
Items that
make up the assembly are listed immediately following
the assembly item entry or reference is made to an
applicable figure.
d.
KITS.
Line item entries for repair parts kits
appear in group 9401 in Section II.
e.
INDEX NUMBERS.
Items which have the word
BULK in the figure column will have an index number
shown in the item number column.
This index number
is a cross-reference between the National Stock
Number/Part Number Index and the bulk material list in
Section II.
f.
ASSOCIATED PUBLICATIONS.
The publica-
tions listed below pertain to the Dump Truck and its
components:
4
Back to Top
