TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 138 of 660
Table 1.
Operator Preventive Maintenance Checks and Services (PMCS) - Continued.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
8
After
Cargo Cover
1. Operate cargo cover controls (Figure 5, Item 1) and
check for smooth operation (WP 0005).
Cargo cover does not
extend or retract properly.
2. Inspect cargo cover for looseness of mounting to
support frame (Figure 5, Item 2), and cuts or tears to
cover. Inspect support frame for damage.
Cargo cover mounting is
loose or cover is cut or
torn. Support frame is
damaged.
3. After operating cargo cover controls
(Figure 5, Item 1), ensure that crank handle is stowed
in storage pouch in BII box.
Figure 5.
Cargo Cover.
9
After
Tailgate Locking
Linkage
Check for damage to tailgate locking linkage
(Figure 6, Item 5).
Tailgate locking linkage is
damaged.
10
After
Rear and
Passenger's
Side Overall
View
1. Check under vehicle for evidence of hydraulic fluid
leakage.
Class III hydraulic fluid
leaks are evident.
2. Check dump body for obvious damage that would
impair operation: e.g., missing or damaged marker
clearance lights (Figure 6, Item 2), taillight
(Figure 6, Item 1), body prop (Figure 6, Item 3), and
adjustment chain (Figure 6, Item 4) at tailgate.
Damage that would
impair operation is
evident.
11
After
Tailgate Locking
Linkage
Check for damage to tailgate locking linkage
(Figure 6, Item 5).
Tailgate locking linkage is
damaged.
TM 5-3805-264-13&P
0017
0017-6
Back to Top
