TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 143 of 660
Table 1.
Operator Preventive Maintenance Checks and Services (PMCS) - Continued.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
Figure 11.
MCS Control Unit.
WARNING
When connected, MCS remote control
overrides cab control unit. When remote
control is disconnected, cab control
activates. To avoid inadvertent opening or
closing of gates, ALWAYS check gate
positions and position of toggle switches on
both cab and remote controls before
plugging in or unplugging remote control.
Toggle switches should be in CLOSED
position. Failure to comply may result in
personnel injury or death.
3. Plug MCS remote control (Figure 12, Item 6) into
receptacle (Figure 12, Item 7) at either side of MCS
tailgate (Figure 12, Item 1). Check that appropriate
MCS remote control does
not work and is required
for mission.
TM 5-3805-264-13&P
0017
0017-11
Back to Top
