TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 332 of 660

INSTALLATION - Continued

3.

Install sprocket (Figure 5, Item 7) on crankshaft (Figure 5, Item 3) with retaining ring (Figure 5, Item 4).

4.

Raise baseplate (Figure 5, Item 8) and position chain (Figure 5, Item 2) under sprocket (Figure 5, Item 7).

5.

Lower baseplate to put tension on chain. Tighten mounting screws (Figure 5, Item 1).

6.

Apply sealing compound sparingly to chain (Figure 5, Item 2) and to roller shaft bearings (Figure 5, Item 5)

on both ends of roll-up bar (Figure 5, Item 6).

Figure 5.

Crank Hardware Installation.

TM 5-3805-264-13&P

0055

0055-6