TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 336 of 660

REMOVAL

1.

Remove rubber strap from connecting arm (Figure 1, Item 3) and swing arm (Figure 1, Item 5).

2.

Remove machine key (Figure 1, Item 11) from shaft (Figure 1, Item 6) on spring assembly

(Figure 1, Item 7). Remove swing arm (Figure 1, Item 5) from shaft. Discard machine key.

3.

Remove locknut (Figure 1, Item 2) and eyebolt (Figure 1, Item 4) and separate swing arm (Figure 1, Item 5)

and connecting arm (Figure 1, Item 3). Discard locknut.

4.

Remove two nuts (Figure 1, Item 10), lockwashers (Figure 1, Item 9), and screws (Figure 1, Item 8) from

spring assembly (Figure 1, Item 7). Remove spring assembly from dump body and from welded shaft

support bar and tube (Figure 1, Item 1). Discard lockwashers.

Figure 1.

Roll-Up Bar Spring Removal.

TM 5-3805-264-13&P

0056

0056-2